|
|
| |
Universal Testing Machines
Microvision Engineering Pvt Ltd
|
Hardware |
|
|
|
|
|
Load Capacity |
10kN |
|
|
Force Ranges |
1 N to 10kN
|
|
|
Force Accuracy |
+/- 0.5% of applied
load @ 5-100%
of capacity |
|
|
Crosshead Speeds |
0.1 to 1000 mm/min
(0.004 to 40 in/min) |
|
|
Speed Precision |
+/- 0.5%
from 0.1 to 500 mm/min
(0.004 to 20 in/min)
+/- 1.0 % from 500 to 1000 mm/min
(20 to 40 in/min) |
|
|
High Speed Return |
1000 mm/min (40 in/min)
maximum |
|
|
Crosshead Speed/ |
0.1 to 400 mm/min
(0.004 to 16
in/min) up to 10kN |
|
|
Force Rating |
400 to 1000 mm/min (16
to 40
in/min) up to 5kN |
|
|
Testing Width |
450 mm
(18.5 in) |
|
|
Crosshead Traverse |
1100 mm (43.3 in) |
|
|
Crosshead Position |
+/- 1 mm of set
position |
|
|
Hardware |
|
|
Electrical |
200/220/240/260VAC +/- 10%, 50 +/- 3 HZ, 5 amp
Single Phase |
|
Air Pressure for |
5 kg/cm2, (500 KPa),
(75 psi) clean compressed air |
Pneumatic Grips
Dimensions |
Width 92 cm (36.2 in),
Height 240 cm (94.5 in), Depth 100 cm (39.4 in)
Not including personal computer |
|
Installed Area |
22
x 122 cm (48 x 48 in) included seated operator |
|
Weight |
350 kg Approx |
|
|
|
Software |
|
Data Sampling Rate |
20 ms |
|
|
Crosshead Speed Units |
mm/min |
|
|
Stress Unitse |
kPa,
MPa, GPa, kgf/cm2, lbf/in2, psi |
|
|
Strain Units |
Actual or percent |
|
|
Time Units
|
Min/sec or decimal min |
|
|
Gauge Length
|
Any length mm, cm or in |
|
|
Specimen Dimensions
|
Area, width or
thickness using preset constants or operator entry,
auto entry option for width and/or thickness selected
from mean, median, highest or lowest value reported from
as many as 6 measurements |
|
|
Crosshead Speed |
Increments of 1 mm/min
|
|
|
Crosshead Position |
Increments of 1 mm
|
|
|
RCrosshead
Limits
|
Preset or selected at time
of test |
|
|
MDevice
Verification |
Load cell |
|
|
Printer Output |
Report heading, sampling,
specimen details |
|
|
|
|
Operating System |
Windows |
|
|
|
|
Operating Mode |
Keyboard or mouse |
|
Click to view Animated
Graph
|
|
Disclaimer of warranty and liability
The
information provided herein is believed to be true
and correct but no warranty is given to its
completeness, accuracy or fitness for use for any
particular purpose. Micro Vision shall not be
liable for any loss or damage arising from the
failure to achieve particular result by the
application of any route, method or process that
is recommended herein.
|
|
|
|
|
